CODELOCK CL400 Front/Back Plates only


The CL400 are front and back plates only.

For use with existing Mortice latch or lock. The existing lock must have 22mm fixing hole below the follower (spindle).

Internal doors and External doors
Front and Back Plates only ā€“ for use with existing Mortice latch or lock
Lever handle lock for doors hung on the left or right
Available in Stainless Steel and Polished Brass
Use in offices / schools / warehouses / hospitals / care homes / nurseries / hotels / leisure facilities / the home
Available in two PVD finishes
Polished Brass, Stainless Steel

The CL400 coded plates are supplied with a random code commencing with the ā€˜Cā€™ clear button. To change the code after fitting, the lock must first be removed from the door. The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 13 buttons a total of 8,191 different codes are available, any of which may be entered in any order.

IMPORTANT: When using CL400 front and back plates only, please test with your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock-cases have a heavily sprung latch follower designed for use with un-sprung lever furniture. This heavy springing can defeat the clutch on our locks. If in doubt do not specify one of our locks with a lock-case that is designed for use with un-sprung lever furniture.

Please note the code chamber for mechanical locks requires the lever to be rotated at least 45 degrees to re-set the lock for the next code user.

Product Code: C040300

Qty Price Per
1148.56 inc. VATEACH
2133.70 inc. VATEACH
3126.28 inc. VATEACH
4118.85 inc. VATEACH
5111.42 inc. VATEACH
6103.99 inc. VATEACH

All prices are subject to VAT

Live Stock Unavailable In Stock Usually Ships in 3-5 Working Days Checking Stock

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK