OPENING HOURS - Mon-Thu 0730-1645 | Fri 0730-1500 | Sat 0830-1215 | Sun Closed
Proxxon PF250/BL Mill/Drill Head 230v for PD250/E & PD400 Lathes 109489 (24112)
Proxxon Mill/drill head PF 250/BL
The milling PF 250/BL is designed and built for milling and drilling on a PROXXON PD 250/E or PD 400 lathe. Both of which are already drilled accept this mill/drill head. The mill/drill’s table replaces the lathe's top slide, thus adding a compound table, with X-Y travel being longitudinally and cross-wise respectively of 110 x 70mm, with 3 T-slots. The millhead tilts up to 90° left and right. Speed can be pre-selected from 400 - 6,000rpm, the head features a digital speed indication. Speed sensors guarantee high torque also in the lower speed range. The tool holder uses ER 16 collets, the PF 250/BL is supplied with 6mm, 8mm and 10mm collets.
A rotational speed chart on the front of the housing shows the appropriate spindle speeds for the most common applications.
Turn a PD250 or PD400 lathe into a mill/drill
T-Slotted compound table with 110 x 70mm travel
Variable speed and tilting head
Includes column, mounting bracket and bolts
Supplied with 6, 8 & 10mm ER16 collets
Incudes column (Ø 35 x 400mm), mounting bracket and fastening screws (the PD 250/E and PD 400 already come with a plane-milled surface).
The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots.
The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively.
The mill/drill head is identical to the miller FF 250/BL. Three collets of sizes 6 - 8 and 10mm are included.
SKU: 24 112
NB - PD250/E or PD400 lathes NOT included.
Product Code: B12PX109489
|1||849.96 inc. VAT||EACH|