Zero Z108 7000 Series Spring Rebound Surface Fixing Door Stays - Max 160kg (Outward Opening)

Description

The door stay includes a heavy duty shock absorbing spring which provides 3° to 5° cushion before dead-stop. The roller arm engages on the frame bracket as the door is opened and holds the door open from 85° to 110°.

To close the door, the door is pulled off the roller arm in the direction of closing. The tension of the hold-open can be adjusted using a spanner on the nut at the end of the rod; clockwise to increase hold-open tension and anti-clockwise to decrease it. These door stays have a pull-off holding force of up to 136kg depending on the adjustment of the end nut and roller arm.

Five sizes to suit heavy duty doors up to the maximum widths as shown in the table below.

Particularly suited to heavy metal doors, maximum door weight 160kg.

Only suits hinged single action doors swinging one way. When fitting to hollow metal doors and frames please ensure suitable reinforcement is provided.

Non-handed and can be fitted to outward opening LH or RH doors.

Standard installation from 85° to 110° angle of opening (5° increments) as per fixing instructions. As with any door stay, mounting the door stay closer to the hinge axis allows the door to open to a greater angle.

Manufactured from a mixture of stainless steel and plated mild steel components.

Supplied complete with four metal thread fixings for the frame bracket, and three bolt-through fixings for the door bracket, suitable for both steel and timber doors. P


Z108.0 - To Suit Door Width 583 - 735mm
Z108.1 - To Suit Door Width 736 - 887mm
Z108.2 - To Suit Door Width 888 - 1040mm
Z108.3 - To Suit Door Width 1041 - 1192mm
Z108.4 - To Suit Door Width 1193 - 1371mm